You must have javascript enabled to use speakerscar.net !

Cerwin Vega replacement tweeter diaphragm CS5 C5G HO5 C6G D9 CORRECT

FIT!

USD $41.99

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: BCA-TW-520 This site contains affiliate links for which we may be compensated Consumer Electronics / Vintage Electronics / Vintage Audio & Video / Vintage Parts & Accessories / Vintage Speaker & Horn Drivers

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $

Finally, after working on these for 5 years, they're done! These are correct in every respect for many Cerwin tweeters used over the years. If you've tried the other diaphragms out there, even the ones listed for these tweeters, you've found a variety of issues. On some, the dome is too big and hits the aluminum bullet, on some, the leads don't come off with the correct orientation to go through the reliefs in the bullet and plastic to the terminals, on some the coils are wrong, many aren't the correct ohms, and on ALL of them, the OD of the "hat" is incorrect, so you have to trim it down, and center the coil by feel and ear, and glue it into place. Or the hat OD is too small, and you still have to center the coil by ear and feel. That's all solved with these. The coil is correct, the leads are correct, the dome is correct, and the OD is correct. Yay!
 These fit all the common tweeters (CS5, C5G, HO5, C6G) and to my knowledge ALL cerwin tweeters with the black plastic cup over the magnet. So these cover the D series, 380se, and way too many models to list. These are 8 ohm impedance. Note, some Cerwin tweeters like say the HF7 for the DX9, used a tweeter that had a diaphragm mounted to a plastic frame. Those "diaphragm on plastic frame" tweeters are different, and replacements for those are available from many sellers. The diaphragms in this listing are for all the "solder in" types that haven't had proper replacements, ever. Till now.
 This is a more tedious repair than diaphragms mounted on cards. Not terribly difficult, but you will need to be able to solder. Kits include instructions (with my phone number if you have questions), replacement cork gaskets and little "foamies", as well as ferrofluid. Cerwin originally went dry with this style tweeter, then went to adding grease on them. The ferrofluid replaces the grease, and I recommend using it with every new diaphragm. Kits of one diaphragm include a 100ul packet of ferrufluid, kits of two have 300ul packets. 100ul per tweeter is recommended. Large orders will include enough fluid for all you buy.
 I'm going with genuine Ferrotec ferrofluid here. Expensive, but designed specifically for tweeters. No iron filings and corn oil here.   
 I did come across one rare tweeter that was somewhat different. It appears to be a C-5A and marked "made in poland". You can tell this one because the screws go into the coil side of the magnet. They are behind the front flange, facing back, and go through the plastic bezel and thread into the front of the magnet.  It does use a solder in diaphragm. This one is more challenging to repair, but thankfully it's extremely rare.  24+ years on Ebay, selling mostly speaker related stuff, and mostly Cerwin Vega, with 100% positive feedback. Will be packed securely and shipped promptly. Thanks!  
Cerwin Vega replacement tweeter diaphragm CS5 C5G HO5 C6G   D9    CORRECT FIT!
cerwin vega
See more
Price type
IN STOCK OUT STOCK